Register Edge Host

To use an Edge host with a host cluster, you must first register it with Palette. A registration token in the user data is required to complete the registration process. You have the following options to register the Edge host with Palette.

Method	Description	Set up Effort
Auto Registration	Edge hosts can automatically register with Palette through a Registration Token. This method requires you to specify the registration token in the user data.	Low
Manual Registration	You can manually enter a unique Edge host ID in Palette.	Low
QR Code	Scan a QR code that takes you to a web application that registers the Edge host with Palette. This method is considered advanced with the benefit of simplifying the Edge host registration without needing a tenant token or a manual entry.	High

warning

A registration token is required for the Edge host registration process. Without the registration token, the registration process will be unable to complete. Review the Create Registration Token guide for steps on how to create a tenant registration token.

Registration Method

To register the Edge host, you are required to use a registration token with all three registration options. Edge hosts are registered under the default project chosen for the registration token. You can override the default project by specifying the project in the Edge Installer user data configuration file.

By default, devices automatically register during the site installation process when a tenant registration token value is present. Set the parameter disableAutoRegister to true in the Edge Installer configuration to disable auto registration and require manual device registration.

stylus:
  site:
    edgeHostToken: MjBhNTQxYzZjZTViNGFhM2RlYTU3ZXXXXXXXXXX
    disableAutoRegister: true

Select the registration method that best fits your organizational needs and review the steps to get started.

• Auto Registration

• Manual Registration

Auto Registration

You can automate the registration process by using registration tokens.

If you selected a default project for the registration token, that is the project the Edge host will be registered under. You can override the default project by providing a project name in the user data.

stylus:
  site:
    paletteEndpoint: api.spectrocloud.com
    edgeHostToken: yourEdgeRegistrationTokenHere

Prerequisites

• Tenant admin access.

• A tenant registration token is required. Refer to the Create a Registration Token guide for more information.

Create Registration Token

To create a registration token, use the following steps.

1. Log into Palette as a tenant admin.

2. Switch to the tenant scope.

3. Navigate to the left Main Menu and select Settings.

4. Select Registration Tokens in the Tenant Settings Menu.

5. Click Add New Registration Token.

6. Fill out the input fields and Confirm your changes.

7. Save the Token value.

Your next step is to decide how you want to provide the registration token. You can include the registration token in the user data added to the device before shipping. Or you can create a user data ISO and have the registration token in the secondary user data. Check out the Apply Site User Data resource to learn more about creating site-specific user data.

Validate

1. Log in to Palette.

2. Navigate to the left Main Menu and select Clusters.

3. Select the Edge Hosts tab.

Your Edge host is displayed and marked as Registered in the Edge hosts list.

Manual Registration

In this mode, you must manually register the Edge host in Palette by providing the Edge host's unique identifier. Optionally, you can specify a project name to associate the Edge host with a particular project.

Use the following steps to manually register an Edge host in Palette.

Prerequisites

• Tenant admin access

• A tenant registration token is required. Refer to the Create a Registration Token guide for more information.

• Access to the Edge host's unique identifier. You can get the unique identifier or machine ID from the console output as the Edge host powers on. The Edge host unique identifier has the default prefix edge-. Example Output:

  time="2022-11-03T11:30:10Z" level=info Msg="starting stylus reset plugin"
  time="2022-11-03T11:30:102" level=info Msg="reset cached site name from uuid, cached: edge-03163342f7f0e6fe20de095ed8548c93"
  time="2022-11-03T11:30:102" level=info Msg="reset cached site name from unid, new: edge-9e8e3342bafa9eb6d45f81c1f6714ea2" MachineD: edge-9eBe3342bafaeb6d45f81c1fb714ea2
  time="2022-11-03T11:30:192" level=info Msg="MachineIP: 10.239.10.145"

info

You can also specify an Edge host's unique identifier in the user data by using the stylus.site.Name parameter. Refer to the Installer Configuration resource to learn more about available configuration parameters.

Register the Edge Host in Palette

1. Log in to Palette.

2. Navigate to the left Main Menu and select Clusters.

3. Select the Edge Hosts tab.

4. Click on Add Edge Hosts.

5. Paste the Edge host's unique identifier in the Edge Host IDs input box.

6. Specify any tags or pairing keys if you desire.

7. Confirm your changes to register the Edge host.

Validate

1. Log in to Palette.

2. Navigate to the left Main Menu and select Clusters.

3. Select the Edge Hosts tab.

Your Edge host is displayed and marked as Registered in the Edge hosts list.

QR Code Registration

You can provide a QR case-based automated registration to simplify the registration process. Upon boot up, a QR code is displayed on the Edge host's console if enabled during the installation phase.

Site operators scan the QR code to visit the registration page. This web page pre-populates the Edge host's unique ID in the web app and provides a list of edge sites they can associate with this edge host.

Site operators can select a site and submit a registration request. The web application automatically creates the Edge host entry in Palette and defines a cluster with that Edge host. This workflow also supports adding Edge hosts to an existing host cluster.

Prerequisites

• A tenant registration token is required. Refer to the Create a Registration Token guide for more information.

• Access to the Spectro Cloud GitHub repository that hosts the Palette Edge Registration App. Contact our sales team at sales@spectrocloud.com to gain access.

• Sufficient permissions to enable third-party integrations with a GitHub repository.

• A Vercel account or a similar serverless website hosting service.

• Experience deploying and maintaining web applications to serverless website hosting services.

• git v2.39.0 or greater.

Enable Palette Edge Registration App

We provide you with a sample serverless application, the Palette Edge Registration App. The Palette Edge Registration App is built on Next.js and deployed using the Vercel platform.

Use the following steps to enable this workflow.

1. Contact Spectro Cloud Support for access to the Palette Edge Registration App repository. Clone the repository.

2. Configure Vercel or your hosting provider to automatically deploy pull requests against the main branch.

3. Update the sample site provided with your site names and locations. Make the required changes in the pages/index.js file. The readme file provides additional details about the files to be changed and instructions on how to build and test the application locally.

4. Map the infrastructure and add-on cluster profiles to be used with each site. Refer to the Model Edge Native Cluster Profile to learn more about Edge Native cluster profiles.

5. Specify site-specific Virtual IP (VIP) addresses or DNS values for each site.

6. Compile and test the code locally.

7. Create GitHub pull request towards your main branch to automatically trigger the build process and deploy the app.

8. Provide the URL of the deployed app to the Edge Installer user data. Use the stylus.site.registrationURL parameter.

   
   

   stylus:
     site:
       paletteEndpoint: api.spectrocloud.com
       registrationURL: https://edge-registration-url.vercel.app

9. Your next step is to decide how you want to provide the registration URL value. You can include the registration URL in the user data added to the device before shipping. Or you can create a user data ISO and have the registration URL in the secondary user data. Check out the Perform Site Install to learn more about creating site specific user data.

10. Power on the Edge host device and scan the QR code.

11. Fill out the required information in the web application and submit the registration request.

Validate

1. Log in to Palette.

2. Navigate to the left Main Menu and select Clusters.

3. Select the Edge Hosts tab.

Your Edge host is displayed and marked as Registered in the Edge hosts list.

Next Steps

The next step in the installation process is to add the Edge host to a cluster or to create an Edge Native host cluster. Check out the Create Cluster Definition guide to complete the last step of the installation process.